H1ghSky1 is a semi-notorious figure in the Fortnite community, who originally gained recognition in 2018 when he was noticed by both FaZe Yusuf and Tfue who both believed him to be 13. However, after joining FaZe and being promoted as their youngest member, it was discovered that he was actually only twelve. FaZe decided to keep him on and he has continued to grow, largely thanks to this. He streamed on YouTube for a while before returning to Twitch upon turning thirteen. However, he has managed to retain his popularity thanks to his fps and editing skill, as well as his upbeat personality and cute relationship with his siblings. Below, we have provided an overview of the peripherals that have been added to H1ghSky1’s gaming setup. However, it should be note that he is sponsored by SteelSeries.


SteelSeries Rival 310 mouse

H1ghSky1 uses a SteelSeries Rival 3 mouse. H1ghSky1’s gaming setup includes the wireless version of the SteelSeries Rival 3 RGB gaming mouse. It integrates a TrueMove Air Optical sensor that provides a DPI range of 100–18,000 that can be set in increments of 100 DPI via its software. It comes with preset DPI options of 1100, 1500 and 2100 DPI, but it has the capacity to store up to five profiles. Its sensor is also able to track at speeds of up to 400 IPS at a maximum acceleration of 40G.

It is primarily constructed from ABS plastic and has an ergonomic shape that accommodates claw and fingertip grip-styles. There are six programable buttons, with two side buttons on the right thumb side, thus making it more suitable for right-handed users. It is fairly lightweight at 96g (3.39oz), but this can be increased by up to 106g (3.74oz) with the addition of adding either one or two batteries. It is compatible with Windows 7 or later, macOS 10.13 or later, iOS 13.7 or later, Chrome OS, PlayStation 4 or 5, Xbox One, Xbox Series S or X devices. It is exclusively wireless and can connect via either 2.4 GHz and Bluetooth. Its dimensions are 12 x 5.8 x 2.2cm (4.74 x 2.3 x 0.5″.)

View on Amazon


SteelSeries Apex 3 TKL

H1ghSky1 uses a SteelSeries Apex 3 TKL keyboard. This is the tenkeyless version of the SteelSeries Apex 3 keyboard. The omission of its number pad is intended to provide gamers with more room with which to maneuver their mouse. It is only available in their SteelSeries Whisper-Quiet Switches. These are Rubber Dome switches that are soldered in place for their IP32 Water & Dust Resistant feature. They provide a quiet tactile feedback. The keyboard also features 24-key rollover and “gamer grade” anti-ghosting. The keycaps can be removed for Cherry MX-compatible keycaps. They also have flip-out feet for added comfort.

Its 8-Zone PrismSync RGB lighting effects can be set through its software, as can up to six macro profiles. These can then be set as double functions on the navigation keys. It has a wired design and it measures 15 x 36.4 x 4cm (5.9 x 14.3 x 1.57″.) It is compatible with Windows 8.1 or later, and macOS 10.12 or later Xbox One, Xbox One Series X, PS4 and PS5.

View on Amazon


H1ghSky1 uses a SteelSeries Arctis 1 Cyberpunk 2077 Edition headset. H1ghSky1’s gaming setup incudes the limited edition of the SteelSeries Arctis 1. Its aesthetic is inspired by the Netrunner ability in Cyperpunk 2077. It offers a stereo sound experience and has 2.4GHz wireless connectivity options that is compatible with PS5, PS4, PC, Nintendo Switch and Android devices, thanks to its micro-USB dongle. It can also be used as a wired device. Its chassis is made of plastic that encases its steel-reinforced headband slider. Its earcups are padded with mesh-covered foam and vibrate in response to in-game occurrences. The earcups can also rotate 90°.

They feature 40mm drivers that provide a frequency response range of 20 – 20,000Hz at a nominal impedance of 32Ω and a sensitivity of 100db.It also comes with a detachable ClearCast microphone that has a bidirectional polar pattern and a noise-cancelling features. They offer a frequency response range of 100-10,000Hz at a sensitivity of -38dB. They weigh 254g (8.96oz.)

View on Amazon


Audio-Technica AT2035

H1ghSky1 uses an Audio-Technica AT2035 microphone. It is a condenser microphone with a sturdy metal construction and large-diaphragm that was designed for streaming and podcasting purposes. It has a cardioid polar pattern that inputs at a side-address. It offers a frequency response range of 20 – 20,000Hz that operates a nominal impedance of 120Ω and a sensitivity of -33dB. It also has an 80Hz roll-off switch and 10dB pad on its base and comes with n shock mount to prevent vibrations from filtering into recordings. It utilizes an XLR connector and requires 48V of phantom power.

View on Amazon


Sony A6400

H1ghSky1 uses a Sony A6400 (w/ 16-50mm) lens camera. The Sony a6400 is a mirrorless digital camera that is intended as an entry-level professional camera. Its 24.2MP Exmor CMOS sensor offers an ISO range of 100 – 32,000 that be expandable to 100 – 102,400 ISO with a Sony E-mount compatible lens. It can record in adjustable framerates of up to 100fps at resolutions of 1920 x 1080 (60p, 30p, 24p) in NTSC mode and at 1920 x 1080 (50p, 25p) in PAL mode. It it powered with an NP-FW50 battery that can last up to 125 minutes of continuous shooting.

The autofocus operates with 425 phase-detection points which enables smooth transitioning during fast-paced recordings. It also offers Bluetooth 4.1, Wi-Fi and wired connectivity and has a 180° tiltable LCD touchscreen, as well as many other useful features that are most likely beyond the requirements of a basic gaming stream. So, if you are just starting out, you might want to consider basic webcams that are used by other top-tier streamers, like the Logitech C922 used by KingRichard or the Razer Kiyo Pro used by FaZeBlaze.

View on Amazon


TC-Helicon GoXLR mixer

H1ghSky1 uses a TC Helicon GoXLR mixer. Unsurprisingly, H1ghsky1’s gaming setup includes the ever-popular HC-Helicon mixer. It is a solo-recording device that can input one microphone at a time by means of either a TS/TRSTRRS jack or XLR connector as well as one headphone jack. There are dedicated channels for Mic, Chat, Music and System each include its own volume slider and mute button.

The right side is dedicated to vocal effects and similar customization options. The top handles the effects like gender-bender and reverb, while the lower part then split into the Left corner with its programable voice sampler for on-the-fly effects, and the damage control right side with its on-the-fly mute button and bleep button. There is also a wide variety of vocal effect options on its software which can be programmed directly onto the device. The RGB lighting effects can also be customized this way.

View on Amazon